Smt sanyo tcm3000 Z41 nozzle (6300529579) used in pick and place machine

Smt sanyo tcm3000 Z41 nozzle (6300529579) used in pick and place machine

SANYO TCM 3000 SMT NOZZLE
Part Number Description
6300529586 TCM SANYO SMT NOZZLE 3000 - Ø 0.6 / Ø 0.4
6300523609 TCM SANYO SMT NOZZLE 3000 -Ø 1.5 / Ø 0.5
6300529616 NZ. Ø 1.8 / Ø 0.5
6300529517 NZ. Ø 0.9 / Ø 0.7
6300529579 NZ. Ø 1.3 / Ø 0.9
6300529524 NZ. Ø 1.8 / Ø 1.1
6300529548 NZ. Ø 3.0 / Ø 2.0
6300529531 NZ. Ø 6.0 / Ø 4.5
6300529555 NZ. Ø 1.3 / Ø 0.9 (MELF)
6300529562 NZ. Ø 2.5 / Ø 1.2 (MELF)

SANYO V820/V822 SMT NOZZLE
Part Number Description
6300298673 V820 / V822 NZ. Ø 0.5
6300322590 V820 / V822 NZ. Ø 0.9
6300322606 V820 / V822 NZ. Ø 1.3
6300298604 NZ. Ø 1.8
6300298611 NZ. Ø 1.8
6300298635 NZ. Ø 3.0
6300298628 NZ. Ø 6.0
6300310726 NZ. Ø 1.3 (MELF)
6300298659 NZ. Ø 2.5 (MELF)

SANYO TCM-60 TCM-V1000 SMT NOZZLE
Part Number Description
N001 NZ. V
N002 NZ. Ø 1.8
N003 NZ. Ø 4.0
N004 NZ. Ø 6.0
N005 NZ. Ø 1.8 / 6 HOLES
N81 V1000 NZ. Ø 0.6 / Ø 0.3
N11 V1000 NZ. Ø 0.9 / Ø 0.6
N71 NZ. Ø 1.3 / Ø 0.8
N21 NZ. Ø 1.8 / Ø 1.0
N41 NZ. Ø 3.0 / Ø 2.0
N31 NZ. Ø 6.0
N51 NZ. Ø 1.3 (MELF)
N61 NZ. Ø 2.5

Issues related to improper nozzle/feeder maintenance or use of poor quality nozzles are often the same. Here are some of the most common problems:
1. Poor pickup location on part. It will cause a loss of vacuum and result in parts shifting on the nozzle during transport.
2. Short/worn nozzles result in poor pickup and can cause the part not to be imbedded into the paste. When the part is not placed into the paste correctly there is not enough surface tension to hold the part while the PCB is moving. Parts will shift.

Smt sanyo tcm3000 Z41 nozzle (6300529579) used in pick and place machine Images